- Open the package, take out the whole machine, take out the machine head, and take out the accessories inside the liner
- If it is a glass bottle, it is necessary to assemble the handle of the cup and ensure that the handle is firmly assembled
- The inner tank of the main engine is added to the large scale water mark (it is forbidden to cross the water mark)
- Place the machine head on the host (check whether the sealing ring of the machine head is installed properly or whether the sealing ring is missing), insert the link (three plug) power plug of the machine head into the host socket, and insert the host power line plug (three plug) into the host power socket.
- After confirming that the plug is correctly connected and firmly inserted, insert the host power plug into the socket
- Press the on / off switch on the left of the display screen of the host, and the display screen will display the default temperature of 105 ℃. At this time, you can adjust the temperature by pressing the up and down buttons on the right of the display screen (the low temperature can be set to 50 ℃, and the high temperature can be set to 108 ℃). When it reaches the required temperature, stop for 1 second, the head fan starts to work, and the host enters the heating state, When it is added to the set temperature, it will stop heating and maintain this temperature (when the temperature is lower than the set temperature, the machine starts heating); If the temperature is not adjusted, the head fan works directly. (if the set value is not adjusted after working, the set value will be displayed after running after power failure)
- Align the water outlet of the water bottle with the water outlet of the main engine. When the main engine is heated for about 30 minutes, distilled water begins to drip slowly from the water outlet of the main engine until the water in the main engine tank is completely dried. The temperature control is automatically protected, and the power supply needs to be turned off.
- When it is necessary to stop water making, press the on / off switch on the left of the host display screen. When the set temperature of the machine is in operation, it can be increased, and the downward adjustment is invalid, and the display screen will display "H"
- This product can continuously cool condensed water, that is, after the water in the inner tank is distilled, press the stop button switch, open the head assembly after an interval of about 10 minutes, add large-scale water into the inner tank of the main engine, press the start button switch again, and cycle like this.
|