Water Distiller Stainless Steel Glass Bucket Dual Screen Touch 750W 4L 1L/H. Precision polishing stainless steel shell and high quality edible stainless steel liner. High hardness and large capacity glass watter bottle. Sensitive touch, convenient adjustment, bring better operating experience. Anti-dry burning function. 304 stainless steel water tray and barrel body. Head assembly handle, easy to handle. 304 stainless steel nozzle, surface fine polishing, clean and beautifu. Four aluminum fan blades, heat dissipation fast, enhance the service life of products. Aluminum condemsing tube, short cooling time, fast water outlet speed. Help you improve the quality of water.
Overview
Advanced silent fan + two disc super cooling technology : Steam super cooling.
ON/OFF switch : Start or stop condensate production at any time.
Anti-dry burning function :After the water inside the main engine is dried , the temperature control will auto automatic protect and turn off the power.
Rapid water production : 4L condensed water can be produced in 3.5 hours.
Product Introduction
This item is suit for hospital, clinic, home, office, laboratory, travel and so on. Autoclave must adopt distilled water as operation medium.Even purified water has various minerals and can produce furring scale after evaporation at high temperature,which,after a period of time,can lead to leaking of steam due to improper closure. It can also lead to the clog in the narrow pipes and pressure sensor,to the malfunction of temperature sensor and to other failures. Once the furring scale enters hand piece and axis. lowering the turning speed of hand piece,thus reading its life span. Therefore, using distilled water is necessary. But since all the clinics are located far from each other. It is difficult for them to buy distilled water. Now with this Water Distilled Machine Provided, you have a reliable source of high quality distilled water as long as you input pipe water!
Cleaning
If the shell is soiled ,wipe it with a flexible cloth.
After each use of the main engine tank ,clean the residual fouling with clean water ,and at least burn the cleaning reagent (citric acid) recommended by our company every month.
Add 1.0L water and 2 tablespoons citric acid into the tank of the main engine , without covering the head component , boil water for about 30 minutes after electrifying ,then pour out the water and use it to clear rinse with water . If scale cannot be removed at one time , the above method can be repeated for cleaning.
If it is a plastic outlet ,it is recommended to replace it every 2 to 3 months.
Common Exceptions and Handing
No distilled water dripping 1.The power supply of the host and the power socket of the machine head are not plugged into the socket .Please check and plug it again. 2.Did not press the start button (the red indicator light did not go on) . 3.No water is added to the main engine tank .
The amount of water distilled each time is not enough 1.The water in the main engine tank does not reach the maximum water level scale. 2.Leakage or poor sealing of the sealing ring of the nose assembly shall be checked , and the sealing ring shall be reassembled or replaced with a new one . 3.No water is added to the tank of the main engine. 4.The outlet nozzle of the machine head is not properly installed , which needs to be removed and reassembled .
The head assembly water boiling process shaking or water overflow 1.The water in the main engine tank exceeds the scale line of the maximum water level. 2.If the head component is not installed in place in conjunction with the host machine ,it shall be taken out and replaced on the host machine ,and the effect of placement shall be properly felt by hand . 3.The sealing ring of the machine head component is not installed well , it needs to be taken out and reassembled. 4.The outlet nozzle is clogged with dirt precipitation , and the outlet nozzle needs to be replaced or cleaned.
