-
A) Power on/off.
When the unit is off or stand by,press “power” button to make the unit power on. If press “power” button continues for 2 seconds,the unit should be power off.
When the unit is power on,after select work mode press “power” button to make the unit working,the unit should be output blue light,press the button again,working stop and turn to be standby.
-
B) Mode select: press “mode” button to select three types of work modes.
“01” Mode: gradually strong mode, light intensity：800-1200mW/cm2, time setting: 10S, 20S, 30S, 40S;
“02” Mode: flashing mode，light intensity：800-1200mW/cm2, time setting: 10S, 20S, 30S, 40S;
“03” Mode: strong mode, light intensity：800-1400mW/cm2, time setting: 10S, 20S, 30S.
-
C) Time select: press “time” button to select the time type. Four types of time:10/20/30/40 seconds can be chosen.
-
D) When the unit is working,the buzzer will beep every 5 seconds.
-
E) Automatically power down:when the unit is standby and without press button for 8 minutes,this unit will be turned off automatically.
-
F) Low battery alert:every time open the unit power,if the voltage of the battery is lower than the set point,this unit will be alarm.The buzzer beeps 5 times and the indicator flashes in the stage,please charge the battery in time.
|
